Introduction Balcony gardeners have few places to put a solar light, and a light perched loose on a railing is one gust away from the street below. A 3D printed balcony saddle is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, small solar chargers, … Read more
Introduction Rain pools on a flat lantern top, creeps into seams, and leaves a lantern dim or dead after a wet week, even though the lamp itself was never faulty. A 3D printed rain hat is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, … Read more
Introduction A favourite garden light gets knocked by a ball, a dog, or a careless boot, and a cracked lens or bent stake ends its season early. A 3D printed protective cage is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, small solar chargers, … Read more
Introduction Garden lights in gravel lean, sink, or wander after rain, because a thin stake has almost nothing to hold it upright in loose stone. A 3D printed gravel stabilizer disc is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, small solar chargers, and … Read more
Introduction Pushing a garden light stake into hard or stony soil bends the stake, cracks the housing, or leaves the light leaning, and a leaning row looks careless even when the lights work fine. A 3D printed pilot hole guide is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such … Read more
Introduction String lights fail at the point where the wire is pulled tight around a corner, and the damage is invisible until a whole section goes dark one evening. A 3D printed strain relief clip is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, … Read more
Introduction A lantern that hangs from a shepherd hook often slides, swings, or sits crooked, and a gust can walk it right off the hook onto the lawn. A 3D printed shepherd hook adapter is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, small … Read more
Introduction A garden light that sits level can still charge poorly when its panel faces flat up under a hedge shadow for half the day, and moving the whole light is not always possible. A 3D printed panel tilt wedge is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such … Read more
Introduction String lights come out of storage as a tangled knot, and untangling them in the cold is the part of the job nobody enjoys, with wires kinked and sockets stressed along the way. A 3D printed spool winder is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as … Read more
Introduction Spare stakes end up loose in a box, bent, muddy, and mixed with the wrong lights, so the first warm evening of the year turns into a sorting job instead of a garden job. A 3D printed stake caddy is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such … Read more