Introduction String lights run down a downspout either dangle free and swing, or get taped on and leave a sticky mess that outlasts the lights themselves. A 3D printed gutter downspout clip is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, small solar chargers, … Read more
Introduction String lights stored loose in a box emerge as a single tangled mass, and the untangling usually claims a lamp housing or two before the lights ever get hung. A 3D printed storage spool is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, … Read more
Introduction String lights hung by eye end up with one span drum-tight and the next drooping onto a bush, and the uneven line is obvious from across the garden. A 3D printed sag gauge is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, small … Read more
Introduction String lights draped over fence posts slide off, snag, or pull the whole run sideways whenever the wind picks up or someone brushes past. A 3D printed fence post top cap is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, small solar chargers, … Read more
Introduction An unused socket on a string light collects rain, and the damp creeps in over winter until that socket, and sometimes its neighbours, stop working. A 3D printed socket rain cap is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, small solar chargers, … Read more
Introduction String lights fail at the point where the wire is pulled tight around a corner, and the damage is invisible until a whole section goes dark one evening. A 3D printed strain relief clip is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as garden lights, path lights, … Read more
Introduction String lights come out of storage as a tangled knot, and untangling them in the cold is the part of the job nobody enjoys, with wires kinked and sockets stressed along the way. A 3D printed spool winder is a simple, original holder, mount, or organiser for sealed low-voltage solar products only, such as … Read more