3D Printed Closet Door Guide Brackets: Guides for Closet Doors

A bright bedroom closet scene, a bypass closet door with a matte charcoal-gray 3D printed guide bracket fitted at the floor

Introduction Bypass closet doors — the kind where one panel slides in front of the other — live or die by their bottom guides. When the guide bracket breaks or goes missing, the bottom of the door swings freely: it rattles when you walk past, bangs into the frame, scrapes the floor, and sometimes jumps … Read more

3D Printed Bi-Fold Door Pivot Brackets: Brackets for Bi-Fold Pivots

A bright bedroom closet scene, a bi-fold door half open with a matte charcoal-gray 3D printed pivot bracket fitted at the top pivot point

Introduction Bi-fold doors are wonderful until one pivot gives up. Then the door sags at one corner, scrapes the floor, pops out of its track, or refuses to fold flat. More often than not, the culprit is a small plastic pivot bracket that has cracked, worn oval, or lost its grip on the pivot pin … Read more

3D Printed Pocket Door Edge Pulls: Pulls for Pocket Doors

A bright hallway scene, the edge of a white pocket door slid into its wall pocket with a matte charcoal-gray 3D printed edge pull fitted flush into

Introduction Every pocket door owner knows the same small humiliation: the door slides fully into its pocket, flush with the frame, and there is nothing to grab. You end up hooking a fingernail into the gap, fishing around with a butter knife, or leaving the door permanently ajar just to avoid the problem. A pocket … Read more

3D Printed Sliding Door Roller Covers: Covers for Sliding Door Rollers

A bright patio doorway scene, the bottom edge of a sliding glass door lifted slightly to reveal matte charcoal-gray 3D printed roller covers fitted

Introduction A sliding patio door that sticks, rattles, or scrapes does not always need new rollers. Often the problem is simpler: the small covers that shield the roller assemblies are cracked, missing, or warped, letting dust, grit, and pet hair work straight into the mechanism. Once that debris builds up, the door drags, the rollers … Read more