Introduction A storm door closer is the pneumatic or spring cylinder at the top of the door that stops it slamming and pulls it gently shut. It works through two small brackets: one on the door, one on the frame, holding the closer’s pins at exactly the right geometry. When a bracket bends, cracks, strips … Read more
Introduction A screen door handle takes more abuse than almost any other handle in the house. It gets pulled dozens of times a day, yanked by children and pets, baked in the sun, and soaked in rain — and the original plastic handles that come with most screen doors eventually crack, fade, or snap off … Read more
Introduction Window screen pull tabs are small, brittle, and doomed. They are the little plastic loops or finger pulls on a screen frame that let you lift the screen out of its track for cleaning or removal — and after a few years of sun, heat, and yanking, they snap off. What is left is … Read more
Introduction Weatherstrip works well along straight runs. It compresses against the door, seals the gap, and keeps drafts out. But at corners, straight weatherstrip has to turn, join, or butt against another run — and that is exactly where seals fail. Foam bunches, rubber kinks, and V-strip folds over itself, leaving a small triangular gap … Read more
Introduction A door sweep does a quiet, useful job: it brushes the threshold, blocks drafts, and keeps dust and insects from sneaking under the door. But a sweep cut to length has an unfinished problem at each end. The cut aluminum bar shows a raw edge, the brush bristles splay and fray, and the rubber … Read more